Properties for Isotropic Injection Molded Compounds
MAGNETIC PROPERTIES | PHYSICAL PROPERTIES | ||||||
Residual Flux Density |
Max. Energy Product |
Coercive Force | Density | Max. Operating Temperature |
|||
Material | Units | Br(kG) | (BH)max (MG0e) |
Hc(k0e) | Hci(k0e)min | g/cm3 | °C |
MQP-15-7 / BaFe / Nylon |
T-302004 | 3.38 | 2.60 | 3.05 | 9.00 | 3.60 | 120 |
T-301086 | 2.89 | 1.94 | 2.69 | 6.50 | 3.24 | 120 | |
MQP-B2 | T-301388 | 3.06 | 2.17 | 2.84 | 6.50 | 3.37 | 120 |
Nylon | T-301089 | 3.81 | 3.32 | 3.48 | 6.50 | 3.92 | 120 |
T-301389 | 3.89 | 3.46 | 3.55 | 6.50 | 3.98 | 120 | |
T-301390 | 4.34 | 4.25 | 3.92 | 6.50 | 4.31 | 120 | |
T-301391 | 4.76 | 5.06 | 4.25 | 6.50 | 4.62 | 120 | |
T-302008 | 5.65 | 6.99 | 4.95 | 6.50 | 5.25 | 120 | |
T-302032 | 4.21 | 4.01 | 3.81 | 9.00 | 4.18 | 120 | |
MQP-B+ | T-302062 | 4.82 | 5.19 | 4.31 | 9.00 | 4.62 | 120 |
Nylon | T-302037 | 5.15 | 5.89 | 4.57 | 9.00 | 4.87 | 120 |
T-302018 | 5.61 | 6.50 | 4.93 | 9.00 | 5.20 | 120 | |
T-302046 | 3.50 | 2.72 | 3.11 | 6.80 | 3.60 | 120 | |
MQP-15-7 | T-302051 | 3.80 | 3.17 | 3.34 | 6.80 | 3.80 | 120 |
Nylon | T-302049 | 4.22 | 3.86 | 3.66 | 6.80 | 4.10 | 120 |
T-302005 | 5.43 | 6.17 | 4.54 | 6.80 | 4.97 | 120 | |
T-302063 | 4.43 | 4.39 | 3.96 | 11.80 | 4.74 | 160 | |
MQP-14-12 | T-302065 | 4.60 | 4.70 | 4.09 | 11.80 | 4.86 | 160 |
PPS | T-302074 | 5.20 | 5.90 | 4.50 | 11.80 | 5.20 | 160 |
Note: All magnetic properties are nominal at room temperature.
This information is based on our experience to date and we believe it to be reliable. It is intended only as a guide for use at your discretion and risk. We cannot guarantee favorable results and assume no liability in connection with its use or the use of the products described. None of this information is to be taken as a license to operate under, or a recommendation to infringe any patents.